Cleaning for Oxygen Service

Cleaning for Oxygen Service is best defined as the removal of combustible contaminates from the surface of any equipment or system in oxygen service, including all parts that make up those components. These contaminates include, but are not limited to, organic and inorganic substances such as hydrocarbon material i.e. oils and greases, paper, fiber, coal dust, solvents, weld slag, rust, sand and dirt. If these contaminates are not removed properly a combustion reaction in an oxygen atmosphere or unacceptable product purity are the result.

PSL has the proper environment, knowledge and necessary equipment to achieve the results required, to produce a safe, clean component for use in Oxygen Service. Each job is given a traveler upon arrival, which follows the component until the job is completed and shipped to the customer. We CERTIFY that your component is Clean For Oxygen Service. The most commonly used specifications in the  industry are CGA G-4.1, NFPA 99 and ASTM G93

We have the ability to clean components of almost any size, shape (including 20 foot tubes) or quantity to any spec that meets or exceeds specifications CGA G –4.1, NFPA 99 and ASTM G93.

At PSL Oxygen Cleaned parts are double bagged and each bag is labeled Cleaned for Oxygen Service, listing the Spec and any other requirements to meet the labeling needs of our customers. PSL has high purity nitrogen purged vacuum packaging available to our customers upon request.